|
RIDDER'S
Terlicht
45
9451
Kerksken
Belgium
phone:
00-32-53-833512
fax:
00-32-53-840994
e-mail
ridders.pack@pandora.be
The right support
and after sales service. This is what we give you day
after day and this 24/24 and 7/7
|
You can ask your questions direct by using ICQ when
we are online. Our ICQ number is 163202313.
If
you do not have ICQ, please download it for free at
www.icq.com
SOLAR HEATING SOLVES 
 |
|
|
Controller for stand alone model heater
Main technical data:
• Power
supply: 220V AC , power consumption:<5w
• Accuracy of temperature
display:±2 ℃
• Range of temperature display: 0~99 ℃
• Accuracy of
temperature control:±2 ℃
• water level scale: 5 lever
• Power of pump:
<800w
• Power of electric heater: ≤2000w
•Electro-magnetic:0.02Mpa-0.8Mpa,suitable for direct water supply
Main function:
• Auto self-check upon starting: When
controller is started, a “Di” voice sounds, which indicates that it starts.
• Water temperature display: display actual water temperature in water
tank.
• Water level display: display water storage in
tank.
• Temperature controlled water feeding: when the solar heater water
tank is NOT full, and the water temperature is higher than expected, (between 60
℃ -100 ℃ ), water feeding can be automatically started until the water
temperature falls to about 50 ℃ .
• Instant feed water: feed water to full
.
• Feed water on preset time: you can use the timer to preset the time of
feeding water.
• Heat on preset time :starts electrical heating according
to preset time and water temperature
• low water pressure protection: during
the course of water feeding ,if the water pressure is too low ,or the running
water is cut off ,this “low water pressure protection” mode automatically starts
to work, stopping the water feeding
• Pipe protection : can connect with
accompany heat belt(Heat belt is only used for water pipe protection for
freezing area) |
|
|
Controller for split system
Main technical data:
|
|
|
|
|
|
